# A Really Thin Oil Film N 125 Drifts On Water N 13

Now, this representation depends on the viewing angle so if lit up with white light you will certainly see tinted fringes. The thinner the film is, the much less colored fringes you will see.

• A thin film of acetone (n 1.25) coats a thick glass plate(n 1.50). White light is incident typical to the film.
• For a solid representation, the two representations must enhance (remain in phase, positive disturbance, etc.).
• If the movie is thinner than thatconstructive interference and also, at some point, there will be damaging interference.
• In the representations, totally devastating interference takes place at 480 nm as well as fully constructiveinterference at 600 nm.

A thin film of acetone (n 1.25) coats a thick glass plate(n 1.50). White light is occurrence typical to the film. In the representations, totally harmful disturbance happens at 480 nm and also completely constructiveinterference at 600 nm. For a solid representation, both reflections should enhance (be in phase, constructive interference, etc.). If the movie is thinner than thatconstructive disturbance and, at some point, there will certainly be destructive disturbance.

Then making use of that angle for the incoming beam, compute the angle of the beam of light in the oil and then the film thickness that gives the required path size for that angle. Considering that the oil has a lower index of refraction than the water, there is a 180 level phase change of the representation at the oil-water limit. There is additionally a 180 degree stage change for representation off the air-oil limit. where eqx_1/ eq, eqx_2/ eq, eq \ dots/ eq represent the amplitudes of the waves required to oscillate parallel to an axis labeled as eqx/ eq. Sign up with hundreds of students and gain open door to 55 hrs of Physics videos that adhere to the topics your book covers.