It’s no secret that water is one of our most precious natural resources. And while we all know that conserving water is important, it can be difficult to know just how much water we use on a daily basis. Take showering, for example.
Most of us enjoy a hot shower every day, but have you ever wondered how many gallons of hot water you use each time you turn on the faucet?
On average, a typical shower uses between 2 and 4 gallons of hot water per minute. So, if you take a 10-minute shower, you’re using anywhere from 20 to 40 gallons of hot water total.
That might not seem like much, but it can add up quickly if multiple people in your household are taking showers every day. In fact, according to the U.S. Environmental Protection Agency (EPA), the average American family uses more than 400 gallons of water per day—and nearly 30 percent of that is from showers!
A typical shower uses about 2 gallons of hot water per minute. That means a 10-minute shower will use 20 gallons of hot water. If you have a high-efficiency shower head, your shower will use even less water.
How Many Gallons of Hot Water Does a Bath Use
How many gallons of water does a typical bath use? The answer may surprise you!
According to the U.S. Geological Survey, the average bathtub holds around 50 gallons of water.
But that’s not all! When you factor in the amount of water required to fill a tub and the amount of hot water needed to make it comfortable, baths can use upwards of 70 gallons of water total.
So how can you reduce your impact?
One way is to take shorter baths, which will obviously use less water overall. You can also try filling your tub only partially full, which will still provide enough room to relax without using as much water. Additionally, consider investing in a low-flow showerhead, which can save hundreds of gallons of water per year while still providing adequate pressure and coverage.
Credit: redcapplumbing.com
How Much Hot Water is Used in a 10 Minute Shower?
The typical American shower uses approximately 17 gallons (64.3 L) of water and runs for about 10 minutes at 2.5 gallons (9.5 L) per minute . This means that the average person uses approximately 25 gallons (94.6 L) of hot water for a 10-minute shower. While there are a variety of factors that can affect this number – such as the type and size of your showerhead, the water pressure, and the temperature of the water – on average, you can expect to use approximately 25 gallons (94.6 L) of hot water during a 10-minute shower.
How Many Gallons of Hot Water Per Minute Does a Shower Use?
The average shower uses approximately 2.1 gallons of water per minute, so a ten-minute shower would use around 21 gallons of hot water. Of course, this varies depending on the type of shower head and the water pressure.
How Much Hot Water Does a 20 Minute Shower Use?
How much hot water does a 20 minute shower use? A 20-minute shower will use approximately 36 gallons of hot water. This is based on the average flow rate of 2.1 gallons per minute and an assumption that the water is turned off while soaping up.
How Long of a Shower Can You Take With a 20 Gallon Hot Water Heater?
Assuming you have a 40 gallon tank and a 4500 watt heater, it will take approximately 1 hour to heat the water from 60 degrees to 110 degrees. This leaves you with about 45 minutes of hot water for a shower.
What Size Water Heater Do I Need? Solved! | Water Heaters 101
Conclusion
It takes about 17 gallons of hot water to fill a standard bathtub. So, if you’re showering, you’re using significantly less water than if you were taking a baths. In fact, the average shower uses between 2 and 4 gallons of water per minute.
That means the typical 10-minute shower uses 20 to 40 gallons of water.
