A phone charger is one of the most essential electronic accessories. It not only keeps our phones powered up but also allows us to use them as a flashlight, an alarm clock, and a communication device. However, when water gets into the charging port, it can cause all sorts of problems.
The good news is that there are a few things you can do to get rid of the water and keep your phone charger working properly.
- Pull the phone charger out of the socket and check to see if there is any water inside the charging port
- If so, use a cotton swab to remove it
- Unscrew the back cover of the phone charger and check for any water damage inside
- If any is found, use a hairdryer to dry out the area
- Once everything is dry, screw the back cover on and plug the charger into the socket
- Check to see if it works properly
How to Get Water Out of Iphone Charging Port Quickly
If you’ve ever accidentally dropped your iPhone in water, you know that the first thing you need to do is get the water out of the charging port as quickly as possible. If water is left in the port, it can cause corrosion and damage to the phone.
There are a few different ways that you can get water out of the charging port on your iPhone.
One way is to use a vacuum cleaner. Put the vacuum cleaner hose over the charging port and turn it on. The suction will pull the water out of the port.
Another way to get water out of the charging port is to use a can of compressed air. Hold the can upside down and spray into the port. The air will push the water out.
You can also try using a hairdryer on its lowest setting. Hold it about an inch away from the charging port and blow dryer for a minute or so. The heat will help evaporate any remaining water in the port.
Finally, if none of these methods work, you can always take your iPhone to an Apple Store or authorized service provider and they can help you get rid of any remaining water in your charging port.
Credit: www.techgyd.com
-How Do I Get Water Out of My Phone Charger
If your phone charger has gotten wet, there are a few things you can do to try and salvage it. First, remove the battery if possible and dry it off. If the port is wet, gently blow into it or use a vacuum cleaner on the lowest setting to suck out any water.
Next, check for any visible damage to the charger itself and see if there are any loose wires. Once you’ve done all that, plug in the charger to see if it’s working again. If not, then unfortunately you’ll likely need to replace it.
Sound That Will Remove Your Water From Charging Port (WORKING!)
Conclusion
If your phone charger has gotten wet, there are a few things you can do to try and salvage it. First, remove the battery if possible and dry it off. If the charger itself is wet, you can try using a hairdryer on the low setting or using a can of compressed air.
Once the charger is dry, reassemble your phone and try charging it again. If your phone still won’t charge, then you may need to buy a new charger.
