If you’re like most people, you probably use a Keurig coffee maker to brew your morning cup of joe. But what you may not know is that these handy little machines can also be used to filter water for drinking. That’s right, with a simple modification, your Keurig can become a water filtration system.
Here’s how to do it: First, purchase a water filter kit designed for Keurig coffee makers. These can be found online or at most major retailers that sell coffee makers. Next, follow the instructions included with the kit to install the filter in your machine.
Once the filter is in place, fill the reservoir with water and run the machine as usual. The filtered water will dispense into your mug just like regular coffee. Enjoy!
- Locate the water filter assembly in the water reservoir of your Keurig K Supreme Plus coffee maker
- Remove the water filter assembly from the water reservoir and discard the used filter cartridge
- Insert a new filter cartridge into the housing of the water filter assembly, making sure that it is properly seated
- Reinsert the water filter assembly into the water reservoir of your coffee maker
- Fill the reservoir with fresh cold water and run a brewing cycle to flush out any impurities that may be present in the system
Keurig K-Supreme Plus Water Filter Instructions
Assuming you would like instructions on how to replace the water filter in the Keurig K-Supreme Plus coffee maker:
If you notice your coffee tasting a little off or if it’s taking longer to brew than usual, it might be time to replace the water filter in your Keurig. Luckily, this is a quick and easy process that will only take a few minutes of your time.
To start, locate the water filter assembly on the back of the coffee maker. You should see a small black knob – this is what you’ll need to turn in order to access the water filter.
Once you’ve located the knob, simply twist it to the left and pull downwards.
The entire assembly should come out easily. If not, give it a little wiggle until it comes loose.
With the assembly removed, take out the old water filter and discard it.
Then, insert the new water filter (make sure it’s facing the correct direction!) and push the assembly back into place.
Finally, twist the knob to lock everything into place and you’re all set! Your coffee will taste better than ever and brewing times should return to normal.

Credit: www.reddit.com
How Do I Put the Water Filter in My Keurig?
Assuming you’re referring to a Keurig-brand coffee maker:
There should be a removable water reservoir on the back or side of your machine. Take off the lid and insert the filter into the opening at the top of the reservoir.
Make sure that the arrow on the filter is pointing towards the spout. Fill up the reservoir and put the lid back on.
Does the Keurig Supreme Plus Have a Filter?
The Keurig Supreme Plus does not have a filter. The water is drawn from the reservoir and passed through a heating element to create steam. This steam then passes through the coffee grounds and into the cup.
How Do You Put the K-Cup Reusable Coffee Filter in the K-Supreme Plus?
Assuming you would like instructions on how to use the K-Cup reusable coffee filter with the K-Supreme Plus:
The first thing you need to do is remove the plastic top from your K-Supreme Plus. This can be done by pressing down on the top and turning it counterclockwise.
Next, take your reusable coffee filter and place it over the exposed coffee grounds holder. Make sure that the handle of the filter is facing out so that you can easily remove it later. Once the filter is in place, screw on the metal cap by turning it clockwise.
You may need to apply some pressure to get it started, but don’t overtighten as this could damage your machine. Finally, insert a coffee pod into the top of the machine and close the lid. Press down on the start button and wait for your coffee to brew!
Where is the Keurig Water Filter Located?
If you’re like most Keurig users, you probably don’t even know that your coffee maker has a water filter. That’s because the filter is hidden away inside the water reservoir. To access it, you’ll need to remove the reservoir from the coffee maker.
Once you’ve done that, you’ll see the filter located near the top of the reservoir.
The Keurig water filter is there to help remove impurities from your tap water before they end up in your cup of coffee. Over time, these impurities can build up and affect the taste of your coffee.
By changing out the filter on a regular basis, you can help ensure that your coffee tastes its best.
How To Install Water Filter On Keurig K Supreme-Easy Tutorial
Conclusion
If you’re one of the many people who own a Keurig K Supreme Plus coffee maker, you might be wondering how to install a water filter in it. Luckily, the process is pretty straightforward and only takes a few minutes.
First, locate the water filter housing on the back of your coffee maker.
Next, take out the old water filter (if there’s one already installed) and discard it. Then, insert the new water filter into the housing, making sure that the arrow on the filter is pointing up.
Once the new filter is in place, screw on the housing lid until it’s tight.
That’s it! Your Keurig K Supreme Plus is now ready to use with filtered water for even better-tasting coffee.