In India, it is estimated that only about 40% of households have access to safe drinking water. This means that the other 60% of households are consuming water that is contaminated with bacteria, viruses, and other harmful contaminants. While there are many commercial water purifiers on the market, they can be expensive and out of reach for many families in India.
Fortunately, there are a number of ways to make your own water purifier at home using common household items.
घर पर बनायें , शानदार वॉटर प्यूरीफायर | Homemade Water Filter How to make water purifier at home
- पानी को गर्मा करें – पानी को बाहर से लें, और 2-3 minute तक microwave में heat क India water is generally not safe to drink without boiling it first
- This will kill any harmful bacteria or viruses that may be present in the water
- Filter paper/cloth aur ek jar lenge – Isme pani ko chan kar ke rakh lein, yeh impurities se safed karega aur jar me daale
- Activated carbon lenge – Uske baad ise filter karne ke liye activated carbon ki madad le sakte hai jo ki bahut achha absorbent hai aur impurities ko jaldi se saaf karta hai
- Sunlight me dalkar rakh dein – Jar ko ulta dalkar direct sunlight me rakh dein, 3 ghante ke baad jar ka cork remove karke chaan lein aur isse apne ghar ke har member ko pilaye
How to Make Water Purifier at Home – Easy Way
If you are looking for an easy way to make a water purifier at home, then this is the blog post for you! I am going to show you how to make a water purifier using items that you probably already have in your home. This project is perfect for those who are looking for a quick and easy way to purify their water.
The first step is to gather all of the materials that you will need. For this project, you will need a clean 2 liter soda bottle, a piece of cloth, some activated charcoal, and some sand. You will also need a funnel and something to cut the bottle with.
Once you have all of your materials gathered, we can get started!
The first step is to cut the bottom off of the soda bottle. You can do this with scissors or a knife.
Once the bottom is cut off, take your funnel and fill the bottle up with activated charcoal. The amount of charcoal that you use will depend on the size of your bottle. Once the bottle is filled with charcoal, add a layer of sand on top of it.
The sand helps to filter out any large particles that might be in the water.
Now it’s time to add your water! Slowly pour your water into the top of the bottle and watch as it filters through all three layers.
The water that comes out should be much cleaner than when it went in!
And there you have it! Your very own homemade water purifier!
This project is perfect for those who are looking for an easy and affordable way to purify their water supply.
Credit: www.instructables.com
घर में पानी को फिल्टर कैसे करें?
While most of us take clean water for granted, accessing safe and reliable water is a challenge for many people around the world. In India, nearly 80% of households do not have access to piped water and must rely on alternative sources like wells, ponds, or rivers.
To ensure that the water they are using is clean and safe, many people filter their water at home using simple cloth filters or more sophisticated filtration systems.
While there are many different ways to filter water, each with its own advantages and disadvantages, here we will focus on how to filter water at home using a common type of household filter known as an “anda”.
An anda is a round clay pot with a small hole in the bottom and a piece of cloth stretched across the opening. To use an anda, simply fill it with dirty water and allow it to sit for a few minutes so that the heavier particles can settle to the bottom.
Then, lift up the cloth strainer and pour the filtered water into another container for storage.
While this type of filtering does not remove all impurities from the water (it will not remove bacteria or viruses), it can be very effective at removing larger particles like sand, dirt, or grit which can make water unpleasant to drink or cause health problems if ingested over time.
पानी फिल्टर करने वाली मशीन कितने रुपए की आती है?
Water filtration machines come in a variety of shapes, sizes and price points. There are many factors to consider when choosing the right machine for your needs, including the type of water you want to filter and the specific contaminants you’re trying to remove.
The most basic water filters can be purchased for as little as $20, while more complex systems can cost hundreds or even thousands of dollars.
The price of a water filtration machine will also vary depending on the features it offers and the capacity of its filters.
Generally speaking, cheaper water filters will need to be replaced more often than their more expensive counterparts. This is because they typically use lower-quality materials that don’t last as long.
Additionally, cheaper filters may not be able to remove certain types of contaminants from your water, so it’s important to do your research before making a purchase.
पानी का फिल्टर कैसे काम करता है?
A water filter is a device that removes impurities from water by means of a physical barrier, chemical process, or biological process. Filters are used to cleanse water for drinking, irrigation, and other purposes. The goal of filtering is to produce clean water that is safe to drink or use.
There are many different types of filters available on the market today. Some filters are designed for specific tasks, while others can be used for multiple purposes.
Water filters work by trapping contaminants in a physical barrier or binding them with chemicals.
The most common type of water filter is the activated carbon filter. This type of filter uses charcoal to remove impurities from water. Activated carbon filters are effective at removing chlorine, taste, and odor from water.
Another popular type of water filter is the reverse osmosis (RO) system. RO systems force water through a semipermeable membrane to remove impurities such as salt, fluoride, and heavy metals.
Conclusion
In this blog post, we will learn how to make a water purifier at home in Hindi. We will need some common materials like a plastic bottle, a piece of cloth, and a rubber band. First, we will cut the bottom off the plastic bottle.
Then, we will cover the mouth of the bottle with the cloth and secure it with the rubber band. Finally, we will fill the bottle with water and let it sit for some time before drinking.
