If you want to increase the water pressure in your Delta shower head, you may need to remove the water restrictor. The water restrictor is a small disk that limits the amount of water that comes out of the shower head. It’s easy to remove the water restrictor and it only takes a few minutes.
- Locate the water restrictor in your Delta shower head
- It is typically located near the base of the shower head or inline with the shower hose
- Use a pair of pliers to remove the small retaining clip that holds the water restrictor in place
- Pull the water restrictor out from the shower head and discard it
- Replace the retaining clip and hand-tighten it to secure it in place

Credit: www.sunrisespecialty.com
Is the a Water Restrictor in Delta Shower Head?
Yes, the Delta shower head has a water restrictor. This is a device that limits the amount of water flow through the shower head to 2.5 gallons per minute. The purpose of the water restrictor is to conserve water and energy by reducing the amount of water that flows through the shower head.
How Do You Remove a Delta Faucet Restrictor?
If your Delta faucet is producing low water pressure, it might be due to a clogged restrictor. The good news is that you can clean or replace the restrictor yourself without having to call a plumber. Here’s how:
First, locate the restrictor. It’s usually located near the base of the faucet, underneath the aerator (the screen that covers the end of the spout).
To remove the restrictor, use a pair of needle-nose pliers to unscrew it from its housing.
If it’s really stubborn and won’t budge, you may need to use a small flathead screwdriver to help pry it out.
Once you have removed the restrictor, inspect it for any signs of debris or buildup. If it looks clean, simply reattach it and screw it back into place.
If there is debris or buildup present, soak the restrictor in vinegar for about 30 minutes to dissolve any gunk before rinsing it off and putting it back in place.
Can I Remove the Restrictor from My Shower Head?
If your shower head has a water restrictor, you can remove it by following these steps:
1. Locate the water restrictor. It is usually located near the base of the shower head or in the connection between the shower head and the water supply pipe.
2. Use a small screwdriver or Allen wrench to remove the screws that hold the water restrictor in place.
3. Pull out the water restrictor and discard it. Be sure to put the screws back in so that they don’t get lost.
4. Turn on the water to test your shower head and make sure that there is no longer any restriction on the flow of water.
How Do I Remove the Restrictor from My Handheld Shower Head?
If you’re looking to increase the water pressure in your handheld shower head, one option is to remove the restrictor. The restrictor is a small disc or screen that’s inserted into the shower head to help control water flow and conserve water. While it’s beneficial from a conservation standpoint, it can also reduce water pressure and make for a less than enjoyable shower experience.
So, if you’re looking for a little more power behind your shower spray, read on for instructions on how to remove the restrictor from your handheld shower head.
To start, locate the restrictor in your shower head. In most cases, it will be located near the point where the hose attaches to the main body of the shower head.
Once you’ve found it, use a pair of pliers or an adjustable wrench to loosen and remove any screws or bolts that are holding it in place. With the screws removed, you should now be able to pull out the restrictor with your fingers. If not, try using a small flathead screwdriver or another pointed tool to gently pry it out.
Once you’ve successfully removed the restrictor, reattach your shower head hose and turn on the water to test things out. You should notice an increase in both water pressure and flow rate. If everything feels good, then you’re all done!
However, if you find that there’s now too much water coming out of your shower head (to the point where it becomes difficult to control), simply reinsert the restrictor (making sure it’s tight this time) and give things another go.
Delta IN2ITION Water Flow Restrictor Removal
Delta Flow Restrictor
If you have a Delta faucet in your home, you may be wondering what the small, round object attached to the end of the water supply lines is. This object is called a flow restrictor, and it serves an important purpose.
The flow restrictor is designed to limit the amount of water that flows through the faucet.
This helps to conserve water and prevents wastage. It also helps to keep the water pressure at a consistent level, which can extend the life of your faucet.
Over time, sediment can build up in the flow restrictor and cause it to become clogged.
If this happens, you may notice a decrease in water pressure from your faucet. To clean a clogged flow restrictor, simply remove it from the faucet and soak it in vinegar for several hours. Rinse it well before reattaching it to your faucet.
Conclusion
If you want to increase the water pressure in your Delta shower head, you can remove the water restrictor. The water restrictor is a small disk that limits the amount of water flowing through the shower head. To remove it, use a pair of needle-nose pliers to unscrew it from the shower head.