One of the most important and easy ways to keep your KitchenAid side-by-side refrigerator running smoothly is to regularly replace the water filter. Not only will this ensure that your ice and water taste great, but it will also help prolong the life of your fridge.
How to Change Water Filter on a KitchenAid Side-by-Side Stainless Steel Fridge MODEL KSRA25ILSS01
- If your Kitchenaid side by side refrigerator is equipped with a water filter, it is recommended that you replace the filter every 6 months
- Here are the steps to replace the water filter: 1
- Locate the water filter housing on the back of your fridge
- Remove the old water filter by turning it counterclockwise
- Insert the new water filter into the housing and turn it clockwise until tight
- Flush the system by running water through the dispenser for 5 minutes before using again
Kitchenaid Water Filter Stuck
If you have a Kitchenaid refrigerator with a water filter, you may have noticed that the filter can become stuck after being used for a while. This is a common problem and there are a few things you can do to fix it.
First, try using a paperclip or other small object to push the release button on the filter.
If this doesn’t work, you can try gently tapping on the side of the refrigerator where the filter is located. Sometimes this will dislodge the filter and allow it to be removed.
If neither of these methods work, your best bet is to call a qualified technician to come and take a look at your fridge.
They will be able to diagnose the problem and get your fridge back up and running in no time!
Credit: www.kitchenaid.com
How Do I Remove the Water Filter from My Kitchenaid Refrigerator?
If your KitchenAid refrigerator has a water filter, you’ll need to replace it every six months or so. To remove the water filter, first locate it on the back of the fridge. Then, twist it to the left and pull it out.
Finally, push the release button on the housing and insert the new filter.
How Do You Change the Water Filter on a Side by Side Refrigerator?
Most side by side refrigerators will have the water filter located in one of the front corners, near the floor. To change the filter, you will first need to locate your refrigerator’s water line shut off valve. This is usually located behind the refrigerator, near where the water line comes into the house.
Once you have located and turned off the water line shut off valve, you can then proceed to changing the filter.
To remove the old filter, start by unscrewing any housing that may be covering it. Once the housing is removed, there will likely be a small cap or plug that needs to be removed in order to access the filter itself.
With the cap or plug removed, simply pull out the old filter and discard it.
To install the new filter, start by wetting it slightly with clean water. This will help get it started as you insert it into place.
Once inserted, screw on any housing or caps that were previously removed. Finally, turn your refrigerator’s water line back on and check for leaks at all connections before restoring power to your fridge.
How Do You Change the Air Filter on a Kitchenaid Side by Side Refrigerator?
If your KitchenAid side by side refrigerator is like most, it has an air filter located behind the grille on the left-hand side. To change the filter, first remove the grille by depressing the two release tabs and pulling it off. Then, twist the old filter a quarter turn to the left and pull it out.
Insert the new filter and twist it a quarter turn to the right until it’s locked in place. Finally, replace the grille.
How Do You Change the Water Filter on a Kitchenaid 5?
If your KitchenAid 5 refrigerator has a water filter, it’s important to change it regularly to ensure the water dispensed from your fridge is clean and tastes great. Here’s how to change the water filter on your KitchenAid 5 fridge:
1. Locate the water filter housing inside your fridge.
It’s usually located near the top of the fridge, behind a small cover panel.
2. Use a Phillips head screwdriver to remove the screws that secure the cover panel in place.
3. Once the cover panel is removed, you should see the water filter housing.
4. Unscrew the cap on the housing (it will likely be marked with an arrow showing which way to turn it).
5. Remove the old water filter from the housing and discard it properly.
6. Insert a new kitchenaid 5 refrigerator into the housing, making sure it’s firmly seated in place.
You may need to give it a quarter turn to get it locked into place correctly.. If you have trouble insertingthe newfilter, check to make sure you’re using one that’s compatible with your specific model of fridge – each model takes a different size/type of filter.
. The owner’s manual for your KitchenAid 5 should list compatible filters.. .
7 Screwthe cap back ontohousing, making sureyou don’t overtightenit as this could damage boththe housing andthe newfilter.. 8 Replacecoverpanelandsecurewithscrews.
. 9 Runwaterfromdispenserfora fewminutesto clearany airfromlinesandto flushout any residual debris fromoldfilter.. 10 YourKitchenAid5refrigeratoris nowreadytodispensecleanandfresh-tastingwater!
Conclusion
If your Kitchenaid Side by Side Refrigerator is in need of a new water filter, never fear! Replacing the water filter is a relatively easy process that only takes a few minutes to complete. This guide will walk you through the steps necessary to replace your Kitchenaid Side by Side Refrigerator’s water filter, so you can get back to enjoying fresh, filtered water and ice.
