There’s nothing worse than a clogged bathtub drain. Water backs up and pools around your feet every time you try to take a shower. And if you have kids, they love to splash and play in the dirty water, making a bigger mess.
But there’s no need to call a plumber every time your drain gets clogged. With a little elbow grease and some common household items, you can unclog your drain yourself.
- The first step is to remove as much water from the tub as possible
- This can be done by using a cup, bucket, or even a mop
- Once the majority of the water has been removed, it’s time to start working on the clog itself
- Begin by pouring a pot of boiling water down the drain
- This will help to loosen any grime or hair that may be causing the blockage
- Follow up with a plunger
- Placing the plunger over the drain and pumping it up and down should dislodge the clog enough for water to start flowing through again
- 5 If neither of these methods works, you may need to use a chemical drain cleaner
- Be sure to read and follow all instructions carefully before using any type of cleaner, as some can be quite harsh on your pipes
How to Unclog your Bathtub Drain in 5 minutes
How Do You Unclog a Drain With Standing Water?
If you have a clogged drain with standing water, there are a few ways you can try to unclog it. First, you can try using a plunger. Put the plunger over the drain and push and pull the handle up and down to create suction.
This may take a few tries, but eventually the suction will break through the clog and clear the drain. If this doesn’t work, you can try using a plumbers’ snake. Insert the snake into the drain and twist it around until you feel it catch on something.
Once it catches, pull on the snake while continuing to twist it until you feel resistance. This means you’ve found the clog. Keep twisting and pulling until you’ve broken through the clog and cleared the drain.
Finally, if neither of these methods works, you can try pouring boiling water down the drain.
How Do You Unclog a Bathtub That Won’T Drain?
If your bathtub is backed up and won’t drain, there are a few things you can do to try and unclog it. First, you can try using a plunger. Put the plunger over the drain and push and pull the plunger up and down.
If that doesn’t work, you can try using a plumbers’ snake. Put the snake into the drain and turn it until you feel resistance. Then continue turning until the clog is dislodged.
If neither of these methods works, you may need to call a professional plumber to clear the drain for you.
Why is There Standing Water in My Bathtub Drain?
If you have standing water in your bathtub drain, it’s likely because there is a clog somewhere in the drain system. The most common cause of a clog is hair; over time, hair can build up and create a blockage. Other causes of a clog include soap scum, dirt, and debris.
If you have a bathroom with multiple drains (such as a sink and shower), the clog may be located in the main drain line that runs from the tub to the sewer. To clear a clog, you’ll need to use a plunger or snake to remove the obstruction.
Can You Put Drano in a Tub With Standing Water?
If you have a tub with standing water and want to get rid of it, you may be wondering if you can put Drano in the tub. The answer is yes, but there are some things you need to know before doing so.
Drano is a product that contains sodium hydroxide and aluminium sulfate.
It’s used to unclog drains by breaking down hair, grease, and soap scum. When these substances build up in your pipes, they can cause clogs. Drano will dissolve them so that water can flow freely through your pipes again.
However, because Drano contains harsh chemicals, it should only be used as a last resort. If you have tried other methods of clearing your clog (like plungering or using an auger), and they haven’t worked, then you can try using Drano. But be sure to take precautions when using this product.
Wear gloves and eye protection when handling Drano. And don’t use it if there are children or pets in the home – they could come into contact with the product and get hurt.
To use Drano in your tub, first remove as much standing water as possible so that there’s only a small amount left.
Then pour half a cup of Drano into the drain and wait 15 minutes for it to work its magic. Finally, flush the drain with hot water to remove any residual chemicals.
Credit: bfplumbingbayarea.com
Bathtub Full of Water Won’T Drain
If your bathtub is full of water and won’t drain, there are a few things you can do to try to fix the problem. First, check to see if there is anything blocking the drain. If there is, try to remove it with a plunger or a plumber’s snake.
If that doesn’t work, you may need to call a plumber.
Conclusion
If your bathtub is full of water and you can’t seem to get it to drain, there are a few things you can try before calling a plumber. First, make sure that the plug is completely open. If it’s not, water won’t be able to drain out.
Next, check the overflow hole to see if it’s blocked. If it is, clear it out so that water can escape. Finally, try using a plunger to force the water down the drain.
If none of these things work, you may need to call a professional for help.
