maytag refrigerator water inlet valve


Fridge Ice and also Water Inlet Solenoid Shutoff. Eco-friendly Coil is Ranked 35 Watts and has 1/4 inch Terminals. Manufacture Model Number Printed on Sticker of Shutoff is K AM. The dispenser changes send out voltage to the dispenser. If one of the dispenser switches over is malfunctioning, the dispenser will not work. To identify if a dispenser switch is defective, make use of a multimeter to evaluate each switch for continuity. If a dispenser switch does not have connection, replace it.

maytag refrigerator water inlet valve

It looks precisely like the original I maintained somehow. Possibly the Robertshaw valve is the OEM source for WHIRLPOOL? Just showing up in a professional package influences some confidence. Unlike the unknown resource replacement that stopped working, this set is nearly quiet with comforting solenoid breaks for the water and also ice solenoids instead of a buzz.

Your ice maker might not create dices or your water dispenser may not function. This damage can happen from product tiredness or regular use, and is an indication the component must be changed quickly. The water inlet valve should be replaced if the solenoids no more have continuity or the valve has inner blockage.

The dispenser control panel controls most of the features of the dispenser system. If the control board is faulty, it might quit providing power to the whole dispenser system. So one dispenser part is not functioning, check each of the dispenser elements before evaluating the control board. It is most likely that a single part has stopped working.

Refrigerator dual water inlet shutoff with fast attach installations. If the water dispenser or icemaker does not work after that the inlet shutoff may be malfunctioning. If the icemaker is making small or hollow dices then the water inlet valve might be restricted and require replacement. This shutoff is to supply water to your refrigerator for the ice manufacturer or the water dispenser. It’s additionally beneficial for filtering your water as it comes through the line. To repair – Check water system to shutoff. No water flow implies shutoff is closed.

The valve requires a minimum of 20psi to function correctly. See to it that the water stress to the valve goes to the very least 20 psi. If the water pressure suffices, use a multimeter to evaluate the water inlet shutoff for continuity. If the water inlet valve does not have continuity, change it.